Tungsten contact showed above is made of tungsten disc with iron leg.
Tungsten contact is widely used in electric industry.
More information, please feel free to contact sales@chinatungsten.com.
2013年6月28日星期五
Hardness Testing
Machine for testing hardness.
Machine for testing hardness can test tungsten rod, tungsten bar, tungsten disc and other shapes.
The above data is to show the hardness of pure tungsten rod.
More information, please contact sales@chinatungsten.com
Machine for testing hardness can test tungsten rod, tungsten bar, tungsten disc and other shapes.
The above data is to show the hardness of pure tungsten rod.
More information, please contact sales@chinatungsten.com
Tungsten Disc with Center Hole
Tungsten disc with center hole is swaged and forged to a density over 19.1g/cm3.
More information, please feel free to contact sales@chinatungsten.com.
More information, please feel free to contact sales@chinatungsten.com.
Tungsten Crucible for Sapphire Growth Furnace
Tungsten crucible used for sapphire growth furnace, is manufactured from tungsten with purity over 99.95% and density around 18.3g/cm3.
Tungsten crucible could be manufacturing by two methods, one is manufacturing from sintering tungsten, and the other one is made from tungsten bar.
More information, please feel free to contact sales@chinatungsten.com.
Tungsten crucible could be manufacturing by two methods, one is manufacturing from sintering tungsten, and the other one is made from tungsten bar.
More information, please feel free to contact sales@chinatungsten.com.
Tungsten Granule Price in June
Tungsten granule price has been increasing a lot in June. The main reason is that raw material-tungsten powder has been going up greatly since April. Until end of June, the price has been 15% up, compared with price in April.
More information, please feel free to contact sales@chinatungsten.com.
More information, please feel free to contact sales@chinatungsten.com.
2013年6月27日星期四
New Discovery of Tungsten Related Machine
News of Tungsten from website:
The
discovery is also the first demonstration of an "n-type" WSe2
field-effect-transistor (FET), showing the tremendous potential of this
material for future low-power and high-performance integrated circuits.
Monolayer
WSe2 is similar to graphene in that it has a hexagonal atomic structure
and derives from its layered bulk form in which adjacent layers are
held together by relatively weak Van der Waals forces. However, WSe2 has
a key advantage over graphene.
“In
addition to its atomically smooth surfaces, it has a considerable band
gap of 1.6 eV,” explained Kaustav Banerjee, professor of electrical and
computer engineering and Director of the Nanoelectronics Research Lab at
UCSB. Banerjee’s research team also includes UCSB researchers Wei Liu,
Jiahao Kang, Deblina Sarkar, Yasin Khatami and Professor Debdeep Jena of
Notre Dame. Their study was published in the May 2013 issue of Nano
Letters.
“There
is growing worldwide interest in these 2D crystals due to the many
possibilities they hold for the next generation of integrated
electronics, optoelectronics and sensors,” commented Professor Pulickel
Ajayan, the Anderson Professor of Engineering at Rice University
and a world renowned authority on nanomaterials. “This result is very
impressive and an outcome of the detailed understanding of the physical
nature of the contacts to these 2D crystals that the Santa Barbara group
has developed.”
“Understanding
the nature of the metal-TMD interfaces was key to our successful
transistor design and demonstration,” explained Banerjee. Banerjee’s
group pioneered a methodology using ab-initio Density Functional Theory
(DFT) that established the key criteria needed to evaluate such
interfaces leading to the best possible contacts to the monolayer TMDs.
The
DFT technique was pioneered by UCSB professor emeritus of physics Dr.
Walter Kohn, for which he was awarded the Nobel Prize in Chemistry in
1998. “At a recent meeting with Professor Kohn, we discussed how this
relatively new class of semiconductors is benefitting from one of his
landmark contributions,” said Banerjee.
Wei
Liu, a post-doctoral researcher in Banerjee’s group and co-author of
the study, explained, "Guided by the contact evaluation methodology we
have developed, our transistors achieved ON currents as high as 210
uA/um, which are the highest reported value of drive current on any
monolayer TMD based FET to date.” They were also able to achieve
mobility of 142 cm2/V.s, which is the highest reported value for any
back-gated monolayer TMD FET.
“DFT
simulations provide critical insights to the various factors that
effectively determine the quality of the interfaces to these 2D
materials, which is necessary for achieving low contact resistances.”
added Jiahao Kang, a PhD student in Banerjee’s group and co-author of
the study.
“Nanoelectronics
and energy efficient computing technology are key areas of research at
UCSB, fields in which our faculty members are renowned for their
achievements. With these results, Professor Banerjee’s team continues to
make important research contributions to next-generation electronics,”
commented Rod Alferness, Dean of the College of Engineering at UCSB.
Their
research was supported by the National Science Foundation, the
California NanoSystems Institute at UC Santa Barbara, and the Materials
Research Laboratory at UCSB: an NSF MRSEC.
Tungsten Bar Price in End June, 2013
Tungsten bar is mainly used for iron metallury, and the price of tungsten bar in Jun. 2013 has been increasing a lot as for the raw material of tungsten powder has been increasing at least 20% since April. Therefore, tungsten bar price with regular dimensions(15mmx15mmx550mm)has been increasing to RMB340.00/KG EXW, XIAMEN.
More information, please feel free to contact sales@chinatungsten.com.
More information, please feel free to contact sales@chinatungsten.com.
2013年6月25日星期二
Tungsten Filament with Length
Tungsten filament as above picture is used widely in lamps. The filaments are made with thin tungsten wire and can be manufactured with single spiral or double spiral.
More information, please feel free to contact sales@chinatungsten.com.
More information, please feel free to contact sales@chinatungsten.com.
Stair-like Tungsten Filament
More information to contact sales@chinatungsten.com.
Straightened Tungsten Filament
Straightened tungsten filament is tungsten filament made from tungsten wire and with two straight legs.
More information, please contact sales@chinatungsten.com.
More information, please contact sales@chinatungsten.com.
Tungsten Support
Tungsten support is designed as part of lamb to support filament. L shape is the one, which is used most widely.Tungsten support is made of tungsten wire with purity over 99.95% and density around 19.25g/cm3.
More information, please contact sales@chinatungsten.com.
More information, please contact sales@chinatungsten.com.
2013年6月24日星期一
Ion Source Tungsten Filament
Ion source tungsten filament, also named IG tungsten filament, is manufactured from tungsten wire with purity over 99.95%. The wire could be chosen with good properties, which can be working under higher temperature.
More inforamtion, please contact sales@chinatungsten.com.
More inforamtion, please contact sales@chinatungsten.com.
Tungsten Price in June
Tungsten price in June has been continuing the trend in April and May. On Jun. 24, the price has been increasing about 20%, and it would be around 30% going up in the future.
As for the price of raw material, the finished products have been influenced a lot. Including pure tungsten, tungsten alloy and tungsten carbide, the products are encountering the same problem.
Any further information, please feel free to contact us.
Email:sales@chinatungsten.com.
As for the price of raw material, the finished products have been influenced a lot. Including pure tungsten, tungsten alloy and tungsten carbide, the products are encountering the same problem.
Any further information, please feel free to contact us.
Email:sales@chinatungsten.com.
2013年6月4日星期二
Fitting for Welding Tungsten Granule
Fitting for welding tungsten granule is tungsten granule, which welded on metal part, which is to improve the roughness of metal surface.
订阅:
博文 (Atom)