Thorium Tungsten Electrode Price on Jul. 27, 2017

Ø3.2x150mmthorium tungsten electrode price is USD1.326/PC on Jul. 27, 2017. WT20 is the most popular grade for thorium tungsten electrode, and it has been the most expensive electrode compared to other kinds, such as pure tungsten electrode, etc.

GTAW Safety

Welders wear protective clothing, including light and thin leather gloves and protective long sleeve shirts with high collars, to avoid exposure to strong ultraviolet light. Due to the absence of smoke in GTAW, the electric arc light is not covered by fumes and particulate matter as in stick welding or shielded metal arc welding, and thus is a great deal brighter, subjecting operators to strong ultraviolet light. The welding arc has a different range and strength of UV light wavelengths from sunlight, but the welder is very close to the source and the light intensity is very strong. Potential arc light damage includes accidental flashes to the eye or arc eye and skin damage similar to strong sunburn. Operators wear opaque helmets with dark eye lenses and full head and neck coverage to prevent this exposure to UV light. Modern helmets often feature a liquid crystal-type face plate that self-darkens upon exposure to the bright light of the struck arc. Transparent welding curtains, made of a polyvinyl chloride plastic film, are often used to shield nearby workers and bystanders from exposure to the UV light from the electric arc.

Welders are also often exposed to dangerous gases and particulate matter. While the process doesn't produce smoke, the brightness of the arc in GTAW can break down surrounding air to form ozone and nitric oxides. The ozone and nitric oxides react with lung tissue and moisture to create nitric acid and ozone burn. Ozone and nitric oxide levels are moderate, but exposure duration, repeated exposure, and the quality and quantity of fume extraction, and air change in the room must be monitored. Welders who do not work safely can contract emphysema and oedema of the lungs, which can lead to early death. Similarly, the heat from the arc can cause poisonous fumes to form from cleaning and degreasing materials. Cleaning operations using these agents should not be performed near the site of welding, and proper ventilation is necessary to protect the welder.

More details, please feel free to contact us by email sales@chinatungsten.com.

GTAW Technique

GTAW Welders often develop a technique of rapidly alternating between moving the torch forward (to advance the weld pool) and adding filler metal. The filler rod is withdrawn from the weld pool each time the electrode advances, but it is always kept inside the gas shield to prevent oxidation of its surface and contamination of the weld. Filler rods composed of metals with a low melting temperature, such as aluminum, require that the operator maintain some distance from the arc while staying inside the gas shield. If held too close to the arc, the filler rod can melt before it makes contact with the weld puddle. As the weld nears completion, the arc current is often gradually reduced to allow the weld crater to solidify and prevent the formation of crater cracks at the end of the weld.

More details, please feel free to contact us by email sales@chinatungsten.com. 

GTAW Manual

Manual gas tungsten arc welding is a relatively difficult welding method, due to the coordination required by the welder. Similar to torch welding, GTAW normally requires two hands, since most applications require that the welder manually feed a filler metal into the weld area with one hand while manipulating the welding torch in the other. Maintaining a short arc length, while preventing contact between the electrode and the workpiece, is also important.

To strike the welding arc, a high frequency generator (similar to a Tesla coil) provides an electric spark. This spark is a conductive path for the welding current through the shielding gas and allows the arc to be initiated while the electrode and the workpiece are separated, typically about 1.5–3 mm (0.06–0.12 in) apart.

Once the arc is struck, the welder moves the torch in a small circle to create a welding pool, the size of which depends on the size of the electrode and the amount of current. While maintaining a constant separation between the tungsten electrode and the workpiece, the operator then moves the torch back slightly and tilts it backward about 10–15 degrees from vertical. Filler metal is added manually to the front end of the weld pool as it is needed.

More details, please feel free to contact us by email sales@chinatungsten.com.

History of GTAW - Plasma Arc Welding

Developments continued during the following decades. Linde developed water-cooled torches that helped prevent overheating when welding with high currents. During the 1950s, as the process continued to gain popularity, some users turned to carbon dioxide as an alternative to the more expensive welding atmospheres consisting of argon and helium, but this proved unacceptable for welding aluminum and magnesium because it reduced weld quality, so it is rarely used with GTAW today. The use of any shielding gas containing an oxygen compound, such as carbon dioxide, quickly contaminates the tungsten electrode, making it unsuitable for the TIG process. In 1953, a new process based on GTAW was developed, called plasma arc welding. It affords greater control and improves weld quality by using a nozzle to focus the electric arc, but is largely limited to automated systems, whereas GTAW remains primarily a manual, hand-held method. Development within the GTAW process has continued as well, and today a number of variations exist. Among the most popular are the pulsed-current, manual programmed, hot-wire, dabber, and increased penetration GTAW methods.

More details, please feel free to contact us by email sales@chinatungsten.com.

History of GTAW - Heliarc

Russell Meredith of Northrop Aircraft perfected the process in 1941. Meredith named the process Heliarc because it used a tungsten electrode arc and helium as a shielding gas, but it is often referred to as tungsten inert gas welding (TIG). The American Welding Society's official term is gas tungsten arc welding (GTAW). Linde Air Products developed a wide range of air-cooled and water-cooled torches, gas lenses to improve shielding, and other accessories that increased the use of the process. Initially, the electrode overheated quickly and, despite tungsten's high melting temperature, particles of tungsten were transferred to the weld. To address this problem, the polarity of the electrode was changed from positive to negative, but the change made it unsuitable for welding many non-ferrous materials. Finally, the development of alternating current units made it possible to stabilize the arc and produce high quality aluminum and magnesium welds.

More details, please feel free to contact us by email sales@chinatungsten.com.

History of GTAW - Gas-shielded Welding

The history of GTAW can be traced up to 19 century, which is by improving the welding and tungsten electrode is not the first material to be found for welding. After the discovery of the short pulsed electric arc in 1800 by Humphry Davy and of the continuous electric arc in 1802 by Vasily Petrov, arc welding developed slowly. C. L. Coffin had the idea of welding in an inert gas atmosphere in 1890, but even in the early 20th century, welding non-ferrous materials such as aluminum and magnesium remained difficult because these metals react rapidly with the air and result in porous, dross-filled welds Processes using flux-covered electrodes did not satisfactorily protect the weld area from contamination. To solve the problem, bottled inert gases were used in the beginning of the 1930s. A few years later, a direct current, gas-shielded welding process emerged in the aircraft industry for welding magnesium.

More details, please feel free to contact us by email sales@chinatungsten.com.