Main Features for SAPMAC Methods-Sapphire and Tungsten

Main features for SAPMAC Methods, which is sapphire growth method and used tungsten as vector:

1) Put through a cold heart shoulder, to ensure that the large size of the crystal growth process of the crystal to the entire end product of genetic characteristics of a good, good material quality.
2) Through high-precision energy control with micro-pulling, so that no significant thermal disturbance in the whole process of crystal growth, significantly reduced the probability of defect initiation than other methods.
3) Since only trace pulling, reducing the temperature field perturbation. Make more uniform temperature field, so as to ensure the success rate of single crystal growth.

4) Throughout the crystal growth process, the crystal is not made crucible, it is still in the hot zone. It can precisely control the cooling rate, to reduce the thermal stress.
5) Suitable for the growth of large-size crystals, the material is more than 1.2 times the comprehensive utilization Kyropoulos law.
6) Use water as the working fluid within the heat exchanger, the crystal can be achieved in-situ annealing, short test cycle than other methods, and low cost.
7) In the crystal growth process, we can easily observe the growth of crystals.
8) Free surface crystal growth, the crucible is not mandatory, can reduce stress Crystals.
9) Can easily use the desired orientation seed and "necking" process, it helps to relatively fast rate.


If there is any other question refer to tungsten crucible for sapphire growth furnace, please feel free to contact us through the following methods:
Email:sales@chinatungsten.com
Tel.:+86 592 512 9696
Fax:+86 592 512 9797